| 6 | Insulation and sheath material of cable and optical cable | 3 | Measurement for determining the density - Water absorption tests - Shrinkage test | Common test methods for insulating and sheathing materials of electric and optical cables - Part 13:Methods for general application - Measurement for determining the density - Water absorption tests - Shrinkage test GB/T 2951.13-2008IEC 60811-1-3:2001 |
| 4 | Hot set test | Common test methods for insulating and sheathing materials of electric and optical cables - Part 21:Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests GB/T 2951.21-2008 |
| IEC 60811-2-1:2001 |
| 5 | Immersion in mineral oil test | Common test methods for insulating and sheathing materials of electric and optical cables - Part 21:Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests GB/T 2951.21-2008 |
| IEC 60811-2-1:2001 |
| 6 | Pressure test at high temperature - Test for resistance to cracking | Common test methods for insulating and sheathing materials of electric and optical cables - Part 31:Methods specific to PVC compounds - Pressure test at high temperature - Test for resistance to cracking GB/T 2951.31-2008 |
| IEC 60811-3-1:1985+A1:1994+A2:2001 |
| 7 | Weightlessness test--thermal stability test | Common test methods for insulating and sheathing materials of electric and optical cables - Part 32：Methods specific to PVC ompounds - Loss of mass test - Thermal stability test GB/T 2951.32-2008 |
| IEC 60811-3-2:1985+A1:1993+A2:2003 |
| 8 | Carbon black content | Common test methods for insulating and sheathing materials of electric and optical cables—Part 41:Methods specific to polyethylene and polypropylene compounds—Resistance to environmental stress cracking—Measurement of the melt flow index—Carbon black and/or mineral filler content measurement in polyethylene by direct combustion—Measurement of carbon black content by thermo gravimetric analysis(TGA)—Assessment of carbon black dispersion in polyethylene using a microscope GB/T 2951.41-2008IEC 60811-4-1:2004 |
| 1 | PV grid-connected inverter | 1 | Contact current | Methods of measurement of touch current and protective conductor current GB/T 12113-2003 Figure 4 |
| Technical specification of PV grid-connected inverter NB/T 32004-2018 11.2.2.3 |
| 2 | Impact tolerance voltage | High-voltage test techniques for low-voltage equipment Part 1: Definitions,test and procedure requirements GB/T 17627.1-1998 6.1~6.2 |
| Technical specification of PV grid-connected inverter NB/T 32004-2018 11.2.2.4.2 |
| 3 | Power frequency tolerance voltage | Technical specification of PV grid-connected inverter NB/T 32004-2018 11.2.2.4.3 |
| 4 | Clearance and creepage distance | Insulation coordination for equipment within low-voltage systems - Part 1: Principles requirements and tests GB/T 16935.1-2008 6.2 |
| Technical specification of PV grid-connected inverter NB/T 32004-2018 11.2.2.4.6 |
| 5 | Partial discharge | Insulation coordination for equipment within low-voltage systems - Part 1: Principles requirements and tests GB/T 16935.1-2008 appendix C |
| Technical specification of PV grid-connected inverter NB/T 32004-2018 11.2.2.4.7 |
| 6 | Glow wire | Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT) GB/T 5169.11-2017 |
